CCC CE CB Certificated 24VDC Switching Power Supply 200W For Stepper Motors

Stepper motors power supply 200W 24V with CCC CE CB certification

Description:

K26B-UP200S24 is 100-240vac input voltage and open frame 24VDC single output switching power supply with PFC function, high quanlity,it is used in electronic LED stage lights.

Features:

1, 200W high efficiency 24V stepper motors power supply;
2, Wide range of AC input voltage,24V 200W single output power supply open frame;
3, Over load, short circuit protection,over-temperature protection;

4, 200W 24V small size power supply built-in active PFC function.

Parameter
Item No.		K26B-UP200S12	K26B-UP200S24	K26B-UP200S36	K26B-UP200S48
Output	Output Voltage	+12V	+24V	+36V	+48V
	Rated Current	16.7A	8.3A	5.6A	4.2A
	Current Range	0-16.7A	0-8.3A	0-5.6A	0-4.2A
	Rated Power	200.4W	204W	201.6W	201.6W
	Ripple & Noise	200mVp-p	240mVp-p	360mVp-p	480mVp-p
	Adjustable Output Range	±10%
	Output Accuracy	±1%
	Line Regulation	±0.5%
	Load Regulation	±0.5%
	Set up,Rise,Keep up time	500ms, 50ms, 20ms
Input	Input Voltage Range	90-264V AC
	Input Current	1.2A@220V AC
	Input Frequency	47-63Hz
	Power Factor	>0.95@110VAC; >0.99@220VAC
	Efficiency @230Vac	＞88%	＞90%	＞90%	＞92%
	Inrush Current	Cold start 15A@115V，30A@230V
	Leakage Current	<0.75mA@240V
Protection	Over Load Protection	110~200% Hiccup automatic protection
	Short Circuit Protection	---
	Over Temp., protection	>105 degree,receovers automatically after the temp. goes down.
Environment	Working Temp.,Humidity	-20~50℃,10~90% RH，No condensation
	Storage Temp.,Humidity	-20~85℃,10~95% RH
	Temp.,Drift	±0.03%/℃(0~50℃)
	Vibration	10~500Hz, 2G 10min /1cycle, PERIOD FOR 60min EACH AXES
Safety&EMC Standards	Safety Standards	GB4943,EN60950
	Withstand Voltage	I/P-O/P:3KV; I/P-FG：1.5KV；O/P-FG:0.5KV DC 1min
	Insulation Resistance	I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms
	EMC Standards	GB9254 EN55022 CLASS B,EN6100-3-2
Others	Dimension	148*60*35mm(L*W*H)
	Weight	0.4kg
Notes	1.All parameters 230VAC input, rated load, ambient temperature 25 ℃, measured under conditions of 70% humidity; 2. Accuracy: includes set up tolerance, line regulation, load regulation and so on; 3. Ripple Test: 30cm long strands connect the power supply and the load on the load side and 0.1u and 47u capacitor to 20MHz oscilloscope measured at the load end; 4. Line regulation: at rated load conditions, the input voltage changes from low to high measured; 5. Load regulation: the measured output load from 0 to 100% load change measured.

Product picture: