PCB Type 60w Dual Output +12V/2.5A -12V/2.5A Smps Switching Power Supply From China Factory
Dual output 60W 12V -12V PCB Switching Power Supply
Description:
KPD60 Series can fulfill the requirements of general medical or industrial applications.
Features:
1,60W DUAL Switching power supply 12V -12V with unversial AC input;
2, 60W SMPS with Short circuit, overload, overvoltage and over temperature protection;
2, 60W SMPS with Short circuit, overload, overvoltage and over temperature protection;
SPECIFICATIONS
| ||||||||||||
Item NO.
|
KPD60-0512
|
KPD60-0524
|
KPD60-1224
|
KPD60-12
| ||||||||
CH1
|
CH2
|
CH1
|
CH2
|
CH1
|
CH2
|
CH1
|
CH2
| |||||
OUTPUT
|
DC OUTPUT VOLTAGE
|
+5V
|
+12V
|
+5V
|
+24V
|
+12V
|
+24V
|
+12V
|
-12V
| |||
OUTPUT RATEDCURRENT
|
6A
|
2.5
|
5A
|
1.5A
|
2A
|
1.5A
|
2.5A
|
2.5A
| ||||
OUTPUTCURRENT RANGE
|
0.1-6A
|
0.1-3A
|
0.1-6A
|
0.1-2A
|
0.1-2A
|
0.1-2A
|
0.1-3A
|
0.1-3A
| ||||
OUTPUT POWER
|
50W
|
61W
|
60W
|
60W
| ||||||||
RIPPLE & NOISE(p-p)
|
50mV
|
100mV
|
50mV
|
200mV
|
100mV
|
200mV
|
100mV
|
100mV
| ||||
VOLTAGE ADJ.
|
CH1:±10% (5V:4.75~5.5V)
| |||||||||||
OUTPUT V. TOLERANCE
|
±1%
|
±5%
|
±1%
|
±5%
|
±1%
|
±5%
|
±1%
|
±5%
| ||||
LINE REGULATION
|
±0.5%
|
±1%
|
±0.5%
|
±1%
|
±0.5%
|
±1%
|
±0.5%
|
±1%
| ||||
LOAD REGULATION
|
±0.5%
|
±4%
|
±0.5%
|
±4%
|
±0.5%
|
±4%
|
±0.5%
|
±4%
| ||||
SETUP,RISE,HOLD UP TIME
|
500ms,50ms,20ms
| |||||||||||
INPUT
|
INPUT VOLTAGE RANGE
|
90-264V AC
| ||||||||||
INPUT CURRENT
|
0.3A @ 220V AC
| |||||||||||
INPUT FREQUENCY
|
47-63 Hz
| |||||||||||
EFFICIENCY
|
80%
|
86%
|
88%
|
89%
|
89%
| |||||||
INRUSH CURRENT
|
Cold start15A/115V，30A/230V
| |||||||||||
LEAKAGE CURRENT
|
<0.3mA@240V AC
| |||||||||||
PRODECTION
|
OVERLOAD PROTECTION
|
110~200%,HICCUP RESET:AUTO RECOVER
| ||||||||||
OVER VOLTAGE PROTECTION
|
130~150%
| |||||||||||
FUNCTION
| ||||||||||||
ENVIROMENT
|
WORKING TEMP., HUMIDITY
|
-10~45℃ 100% LOAD,45~60℃ 60% LOAD，10~90% RH，No condensation
| ||||||||||
STORAGE TEMP., HUMIDITY
|
-20~85℃，10~95% RH
| |||||||||||
TEMP. COEFFICIENT
|
±0.03%/℃(0~50℃)
| |||||||||||
SAFETY&EMC
|
SAFETY STANDARDS
|
EN60950; GB4943; UL60950
| ||||||||||
WITHSTAND VOLTAGE
|
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
| |||||||||||
ISOLATION RESISTANCE
|
I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms
| |||||||||||
EMC STANDARDS
|
Meet FCC.PART15.CLASS B; EN55022 CLASS B
| |||||||||||
OTHER
|
DIMENSION
|
101.6*50.8*27mm
| ||||||||||
WEIGHT
|
0.3Kg
| |||||||||||
NOTE
|
1. ALL PARAMETERS ARE SPECIFIED AT 220VAC INPUT, RATED LOAD, 25ºC 70% RH. AMBIENT.
2.TOLERANCE:INCLUDE SET UP TOLERANCE, LINE REGULATION, LOAD REGULATION.
3.RIPPLE & NOISE ARE MEASURED AT 20MHz BY USING A 12" TWISTED PAIR TERMINATED WITH A 0.1uF & 47uF CAPACITOR.
4.LINE REGULATION IS MEASURED FROM LOW LINE TO HIGH LINE AT RATED LOAD.
5.LOAD REGULATION IS MEASURED FROM 0% TO 100% RATED LOAD, AND OTHER OUTPUT AT 60% RATED LOAD.
| |||||||||||
Product picture:
FAQ
A1: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2: Do you accept OEM/ODM for the switching power supply?
A2: Yes. we do.
Q3:How about the quality?
A3:We have the better professional and experienced engineers team and strict QA and QC system.Repair rate under 0.1%~0.2%
Q4:What is PFC?
A4:PFC stands for Power Factor Correction. The purpose of PFC is to improve the ratio of apparent power and real power. The power factor is only 0.5~0.7 in non-PFC models. In PFC models, the power factor can reach above 0.9. The calculation formulas are as below:
Apparent Power=Input Voltage x Input Current (VA)
Real Power= Input Voltage x Input Current x Power Factor (W)
评论
发表评论