Battery charger switching power supply 1000W dual 48V 36V

1000W dual 48V 36V switching power supply

Description:

Dual 48V 36V power supply 1000W is suitable for use in telecommunications, networking, test and measurement, IT applications, general electronics, low profile systems, automation, POS, motor based machinery and non patient contact medical equipment.

Features:

1, Dual 48V 36V power supply with full range of AC input voltage；
2, 1000W power supply 48V 36V have short circuit, overload, overvoltage and over temperature  protection；

3, 1000W 48V 36V DUAL output power supply built-in active filters,low output noise；

4,This 1000w smps has high efficiency and low output noise.

Parameter
Item NO.		K19H-UP1000D48+36
		CH1
Output	Output voltage	+48V
	Rated current	15A
	Current range	0-20A
	Rated power	1000W
	Ripple	600mVp-p
	Output adjustable range	±5%
	Output accurancy	±1%
	Line regulation	±0.5%
	Load regulation	±0.5%
	Set-up,rise,hold up time	500ms, 30ms,5ms/115VAC   300ms, 30ms,10ms/230VAC
Input	Input voltage	88~264V AC
	Input current	12A/115V   6A/230V
	Frequency	47~63Hz
	Efficiency	92% @230V,88% @115V
	Inrush current	40A@230V
	Leakage current	<3.5mA@240V
	Power factor	>0.9@220V,>0.95@110V
Protections	Overload protection	105~150% protection, automatic recovery
	Short circuit protection	Automatic recovery
	Output overvoltage protection	55-62V
	Over temperature protection	The case temperature is greater than 105 ° C, the output is off, and the recovery is automatic.
Other function	Auxiliary power supply	Provide 12V 0.2A auxiliary voltage output
	Standby function	At the RC terminal, add a high level，turn off the CH1 and CH2 outputs.
Environment	Working temperature, humidity	-20~+60℃，10~90% RH，No condensation
	Storage temperature, humidity	-40~85℃，10~95% RH
	Temperature drift	±0.03%/℃(0~50℃)
	vibration	10~500Hz, 2G 10min./1cycle, PERIOD FOR 60min. EACH AXES
Safety&EMC standards	Safety standard	GB4943
	Withstand voltage	I/P-O/P:3KV，I/P-FG：1.5KV；O/P-FG:0.5KV DC 1min.
	Insulation resistance	I/P-O/P, I/P-FG, O/P-FG:500VDC / 100M Ohms
	EMC standard	EN55032 CLASS A,EN61000-3-2
Others	size	180*82*48mm
	weight	1.2Kg
Remarks	1. All parameters are measured at 220 V AC input, rated load, ambient temperature 25 ° C, humidity 70% 2. Accuracy: including setting error, line regulation, load regulation rate; 3. Ripple test: 30cm long wire with the power and load, load and 0.1u and 47u capacitance to 20MHz oscilloscope measured at the load side; 4. Line regulation: the rated load conditions, the input voltage changes from low to high measured; 5. Load regulation: Measured output is measured from 0% load to 100% load change.

Product picture: